PRODUCT:

A)Admixtures 

MIXMASTERS ADMX 517- C 

PRECAST ACCELERATOR CUM NORMAL PLASTIZICER

 

ADMX 517 C is based on MELAMINE. ADMX 517 C ideal for providing increased resistance to frost damage during and after construction of hollow blocks. Ideal for block making. Use of ADMX 517 C reduces the damage in transportation of Blocks. Gives additional frost protection by reducing the water content and accelerating hydration of cement. When added to Cementitous mixes it accelerates hydration and enables the water content to perform more efficiently. 

MIXMASTERS ADMX 517-

CMS ACCELERATOR CUM NORMAL PLASTIZICERS

ADMX 517 CMS is based on SMF and other additive. ADMX 517 CMS ideal for providing increased resistance to frost damage during and after construction of hollow blocks. Ideal for block making. Use of ADMX 517 CMS reduces the damage in transportation of Blocks. Gives additional frost protection by reducing the water content and accelerating hydration of cement. When added to Cementitous mixes it accelerates hydration and enables the water content to perform more efficiently. 

MIXMASTERS ADMX 517- S 

HIGH RANGE ACCELERATOR 

ADMX 517 S is based on SMF and other additive. ADMX 517 S ideal for providing increased resistance to frost damage during and after construction of hollow blocks. Ideal for block making. Use of ADMX 517 S reduces the damage in transportation of Blocks. Gives additional frost protection by reducing the water content and accelerating hydration of cement. When added to Cementitous mixes it accelerates hydration and enables the water content to perform more efficiently.

MIX ADMX I-LWP 501 INTEGRAL WATERPROOFING LIQUID

I-LWP 501 is a liquid admixture for concrete to achieve high resistance to water ingress. It is based on a blend of surface active agents and lignosulphonate.

B)Waterproofing

MIX FLEX ACRY - BOND Mix Flex 

Acry Bond is a specially formulated high build highly flexible aqueous, anionic dispersion of pure Acrylic styrene based milky white liquid which is used for as flexible waterproofing coatings and sealers. Meets Requirement of DIN 53479. 

USES: 

Mix Flex Acry Bond is a specially formulated high build highly flexible aqueous, anionic dispersion of pure Acrylic styrene based milky white liquid which is used for as flexible waterproofing coatings and sealers. Meets Requirement of DIN 53479. 

1) For waterproofing terraces, where high flexibility is required.
2) For arresting rising dampness.
3) For water proofing leakages from toilet units and sunk slabs.
4) For preventing penetration of chlorides into the concrete.
5) For making flexible waterproofing mortars
6) For waterproofing porous plaster surface

SURFACE PREPARATION:

Preparation of Surfaces to be treated is of utmost importance. The surface should be clean free from any bitumen, oil, grease and loose particles. All laitance and loose particles should be removed by wire brushing and all undulation and cracks should be filled with made good using Elasto build (Special) Repair systems. In case of badly honey combed surfaces give a layer of screed or plaster to make it worthy to receive the treatment. 

FEATURES: 

1. Designed for a broad range of applications.
2. Acrylic/ styrene based.
3. Highly flexible, excellent crack bridging capacity.
4. Plasticizer free.
5. Very good water resistance.
6. Good film formation.

DIRECTIONS FOR USE: 

1. Terrace water proofing
a) On the prepared terrace surface apply Coat.
b) The coats are to be applied at wet in wet.
2. Flexible repair mortar For various applications Mix latex z3 is used in the form of bonding slurry and as an additive in the modified Mortar.

PROPERTIES:

Color Milky White
Solids Content % 50
Ph 7 to 8.5
Viscosity at 23° C 140-200 mPas
Stabilization Non-Ionic
Ultimate Elongation 1600 %
Bactericide yes
Antifoam yes
Minimum film
Forming temperature <1 c

PACKING:

Mix Flex Acry Bond is supplied in Project Packing Also.

SHELF LIFE:

One year if kept sealed in original packing in cool and dry place.
________________________________________