PROPERTIES: 

Appearance Milky White Pourable Liquid

Odor Faint aromatic
Emulsifying system Synthetic Anionic and Nonionic
Total Solids 50.0 ± 1.0 ISO 3251
PH 7 - 9.5 ± 0.5 ISO 976
Viscosity (Brookfield LVF,60 RPM)
CPS SP.1,12 RPM at 25 300 max
Specific Gravity 1.023 ± 0.005
Solubility in Water Insoluble but Miscible in all proportions

Advantages with Mix latex HZ3 – SBR
• Provides Excellent Water impermeability
• Offers good Workability at reduced water / Cement Ratio
• Improved Bonding and Adhesion to substrates
• Improved Toughness and flexibility
• Mixes can be applied in thinner sections
• Improved abrasion resistant flooring
Storage And Handling 

HZ3 – LATEX 

Must be Stored in Closed containersbetween 5 to 40 c And protected from frost and direct sunlight. Detailed Information is available on request. Information on environmental and hazard data may be taken From the material safety data sheet. HZ3 – is not classified as dangerous according to EC DIRECTIVE. 

FEATURES: 

1. Designed for a broad range of applications.
2. Acrylic/ styrene based.
3. Highly flexible, excellent crack bridging capacity.
4. Plasticizer free.
5. Very good water resistance.
6. Good film formation.

DIRECTIONS FOR USE:

1. Terrace water proofing
a) On the prepared terrace surface apply Coat.
b) The coats are to be applied at wet in wet.
2. Flexible repair mortar For various applications Mix latex z3 is used in the form of bonding slurry and as an additive in the modified Mortar.

PACKING:

Mix Flex Acry Bond is supplied in Project Packing Also.

SHELF LIFE: 

One year if kept sealed in original packing in cool and dry place.

C)Building Repairs

MIX FLEX ACRY - BOND

Mix Flex Acry Bond is a specially formulated high build highly flexible aqueous, anionic dispersion of pure Acrylic styrene based milky white liquid which is used for as flexible waterproofing coatings and sealers. Meets Requirement of DIN 53479.

MIX LATEX HZ3 – SBR – 510

MIX LATEX Z3 - is a water-Based Non-ionically stabilized Hydrolysis- Resistant dispersion of a Styrene Composite Carboxylated – Butadiene Co Polymer. The dispersion is freeze-thaw Stable. It contains an antioxidant and is compatible with Most Hydraulic Blinders.

Mix LATEX Z3 – SBR

MIX LATEX Z3 - is a water-Based Non-ionically stabilized Hydrolysis- Resistant dispersion of a Styrene Composite Carboxylated – Butadiene Co Polymer. The dispersion is freeze-thaw Stable. It contains an antioxidant and is compatible with Most Hydraulic Blinders. 

MIX COAT - 80

Safe Coat for Reinforcement MIX COAT 80 is a two pack anti-corrosive protective coating for structural steel and reinforcement. 

D)Grouts

No Content 

E)Tile Adhesive & Grout

No Content

F)Heat Resistant Coating

No Content 

G)Decorative Coating

MIX COAT 49 – MIX COAT is specialized acrylic co-polymer based water repellent coating suitable for waterproofing applications on pores surfaces especially for terra cotta roof tiles. The Micro particles of mix coat penetrate through the voids and seals the pores in applied surface and making it water tight apart from providing a glossy finish. Prevents Growth of fungi, algae , Micro- Organisms.

• Enhanced Water Repellent
• Prevents surface damage from tank and frost attack
• Easily Applicable by brush , roller or spray
• Prevents Surface from the attack of salty and acidified atmosphere.
• High Abrasion Resistant
• Resistant to UV rays & Whether
• Acid Resistance
• Clear Coat with Glossy Finish

Technical Info:

Form Semi viscous fluid
Colour White / Shade
Odour Characteristic
Required coats 2 Coats
Initial dry time 30 min
Final Dry time 48 hrs
Film Thickness 40 Microns – 2 coats